14.6 Touch Panel Check
14.6.1 Touch panel check function
Touch panel check is a function which checks whether there is no dead zone area in touch key minimum unit
(16 dots x 16 dots).
14.6.2 Display operation of Touch panel check
Main menu
(
9.3 Utility Display)
Touch
[Debug & self check]
Starts Touch panel check
When touch [Touch panel check] of [Display check],
Touch panel check starts.
Notes on Touch panel check
Debug & self check
If the touched part is not filled with yellow color, there are the following two possible
causes.
1. Display part failure
2. Touch panel failure
In that case, contact your local Mitsubishi (Electric System) Service.
Self check
Touch
[Self check]
14.6 Touch Panel Check
14.6.1 Touch panel check function
Touch
[Touch panel check]
14
- 15
9
10
11
12
13
14
15
16