Mitsubishi GOT1000 GT15 User Manual page 469

When [External auth (general)] or
[Fingerprint authentication] is
selected, the check box for
[Operator name + password] is
displayed.
If the check box is selected, the
login is also enabled with
[Operator name + password].
(c) Touch [Password expiration
date], and then the Password
expiration date edit dialog box is
displayed. Input the expiration
date.
When the input is completed,
touch the
(d) Initial position input
Set the initial position input (byte
count) of external authentication
ID from among the data read
from the external authentication
device.
(e) Valid byte count input
Set the valid byte count for
external authentication ID.
(Only available when the external
authentication (general) is set as
the authentication method.)
4 Touch the
OK
input, and then the dialog box shown left is
displayed and the input setting is saved.
5 Touch the button without touching the
button, and then the dialog box
OK
shown left is displayed.
14.11 Operator Information Management
14.11.3 Function setting
key.
Enter
button after all items are
14
- 57
9
10
11
12
13
14
15
16