(2) Range where the settings changed in the [Ethernet setting] screen are reflected
The settings changed in the [Ethernet setting] screen are valid in the GOT.
On the other hand, they are not overwritten to the project data written to the GOT.
The changed settings are not reflected to the project data which is read from the
GOT after changing the settings.
If the GOT data is copied with the GOT data package acquisition, the change in
the [Ethernet setting] screen is reflected to the copied data.
1
Change of host
1
Touch the device to be set as the host.
2
Setting contents are defined if
is touched.
3
If touch
button without touching
button, the dialog mentioned left is
displayed.
4
Touch the
button to restart GOT and to
reflect the setting contents.
10.3 Ethernet Setting
10.3.3 Display contents of Ethernet setting
9
10
11
button
OK
12
OK
13
14
15
16
10
- 21