Table of Contents
Advertisement
10
10.1 Communication Setting
- 6
10.1.3 Communication setting contents
(b) Priority against [Controller Setting] of GT Designer3 or [Communication
Settings] of GT Designer2
If download the communication settings to the GOT with GT Designer3 or GT
Designer2 after the automatic assignment, the GOT will operate with the
communication settings of the GT Designer3 or GT Designer2. (The GOT
operates with the latest communication settings.)
(3) When the communication driver does not match with the unit that is installed in the
GOT
An error is displayed on the GOT when displaying [Communication setting].
If an error is displayed, confirm the combination of the communication driver and
communication unit.
Refer to the following manual for the combination.
•GOT1000 Series Connection Manual for GT Works3 and a controller
used (System Configuration in each chapter)
•GOT1000 Series Connection Manual for GT Designer2/GT Works2
(System Configuration in each chapter)
Advertisement
Table of Contents
Troubleshooting
