Installing Procedure - Mitsubishi GOT1000 GT15 User Manual

8.16.2 Installing procedure

(1) For GT15-70ATT-98, GT15-60ATT-97, GT15-60ATT-96, GT15-60ATT-87 and GT15-60ATT-77
The following figures show an example of the GT15-60ATT-97 installarion.
Follow the same procedure for installing the other models.
1 The model name is indicated on the attachment.
The upper part of the attachment has the model indication.
(Example of model indication)
2 Hang the two upper hooks on the upper part over the mounting holes in
the control panel.
Refer to the figure shown in
3 While lifting the attachment upward, hang the two lower hooks on the
lower part of the control panel.
4 Fix the attachment to the control panel with four clamp screws in the
torque range of 0.2 to 0.28N•m.
5 Place the GOT into the attachment from the front, and fix it by tightening
the mounting screws included with the GOT in the torque range of 0.36
to 0.48N•m.
.
Upper
part
Lower
part
8.16 Attachment
8.16.2 Installing procedure
1
Model
2
Upper
part
Lower
part
3
4
5
6
7
8
8
- 59