Mitsubishi GOT1000 GT15 User Manual page 528

(3) Wiring of GOT's FG cable and power line
Current status
Measure for
the cables
installed
together
(4) Surge measures
Current status
Measure for
the equipment
without a
surge
suppressor
used
Entry area
Model name of the surge suppressor
20
20.1 GOT Restoration Sheet
- 8
GOT
LG FG
Power for the power equipment
GOT
LG FG
Power for the power equipment
PLC
Output
AC
PLC
Output
AC
The surge suppressor must be
attached close to the load
The FG cable and power line of
the GOT are installed together.
Separating the FG cable and
power line of the GOT in wiring
reduces the influence of noise.
A surge suppressor is used for
the wiring of the load such as
MCCB, electromagnetic
contactor, relay, solenoid valve,
or induction motor.
C
(When a surge suppressor is
L
R
used, fill out the entry area below
with the surge suppressor model
name and the name of the
equipment for which the surge
suppressor is used.)
Attaching the surge suppressor
C
on the cable close to the load can
L
R
reduce the influence of surge on
the GOT.
Installed
together
Not installed
together
Effective
Ineffective
Used
Not used
Effective
Ineffective
Equipment name