Mitsubishi GOT1000 GT15 User Manual page 514

3 For GT15-60VLTT or GT15-60VLTN
Backlight replacement varies with the hardware version of the applicable GOT.
Before replacement, please confirm the hardware version.
( Appendix 2 Confirming of Versions and Conformed Standards)
Type
GT1565-VTBA
GT1565-VTBD
GT1562-VNBA
GT1562-VNBD
(1) Replacement 1
1 Power off the GOT.
2 Disconnect the power supply cable and communication cable.
Remove the GOT from the control panel.
3 Remove the extension unit cover on the right side of the GOT.
Remove the extension unit, e.g. bus connection unit, if it is mounted.
4 Remove the GOT rear fixing screws (8 pcs.) with a screwdriver.
5 Remove the case after passing the battery holder through the mounting hole.When removing, take care
of not cutting the cable of the battery holder.
19
19.6 Backlight Replacement
- 13
19.6.2 Replacement procedure of backlight
Hardware version
D (April, 2005) or earlier
E (March, 2005) or later
A (Jul, 2005) or later
A (Sep, 2005) or later
A (Sep, 2005) or later
(Expanded figure of part A in
(2) Replacement procedure 2
(1) Replacement procedure 1
(1) Replacement procedure 1
(3) Replacement procedure 3
(3) Replacement procedure 3
A
)
Reference