5
Setting of Host (PC)/Host (Modem)
The following describes how to set the [Host (PC)] and [Host (Modem)].
When setting [Host (PC)] for [PC connection type], the following settings are not required.
Set as follows only when selecting [Host (Modem)].
Item
PC connection type
Transmission Speed
Data Bit
Stop Bit
Parity
Timeout Time(SEC.)
Retry(TIMES)
Init. AT command
Modem operation
*1
The maximum number of characters of the AT command depends on the specifications of the modem.
When the maximum number of characters of the AT command which can be used for a modem is less than 255,
the initialize command is set according to the specifications of the modem.
10
10.1 Communication Setting
- 12
10.1.4 Communication setting display operation
Description
Connecting method to the PC can be selected.
Set the transmission speed for communication.
Set the data bit for communication.
Set the stop bit for communication.
Set whether to check the parity for
communication and select the format to check.
Displays the timeout time (sec.) for
communication.
Displays the number of retry (times) for
communication.
Set the AT command to initialize the modem.
Touch the [Init.] button to initialize the modem.
Touch the [Disc.] button to disconnect the line.
Setting range
Host (PC)/Host (Modem)
<Default: Host (PC)>
9600/19200/38400/57600/115200
<Default: 115200>
7/8 <Default: 8>
1/2 <Default: 1>
Odd/Even/None <Default: Odd>
<Default: 1 (fixed)>
<Default: 1 (fixed)>
English one byte characters within 255
*1
characters
<Default: AT&FE0%C0&K0&D0W2S0=1>
-