Mitsubishi GOT1000 GT15 User Manual page 414

Item
Network monitor
Motion monitor
Servo amplifier monitor
CNC monitor
Backup/restoration
CNC Data I/O
SFC Monitor
Ladder editor
Motion SFC monitor
*1: CC-Link IE Field Network is not compatible.
14
14.1 Debug
- 2
14.1.1 The Debug function
The network status of the MELSECNET/H, MELSECNET/10,
MELSECNET(II), CC-Link IE Controller Network, and CC-Link IE
Field Network can be monitored.
The servo monitoring and parameter settings of the motion
controller CPU (Q series) are available.
Various monitor functions, parameter change, test operation, etc.
of the servo amplifier are available.
Functions equivalent to the MELDAS dedicated display, such as
Position Display Monitor, Alarm Diagnosis Monitor, Tool Offset/
Param, and Program Monitor, are available.
Executing backups, executing restorations, and deleting backup
data are possible.
Machining programs, parameters, and others of the CNC
connected to the GOT can be copied or deleted.
The GOT can monitor and display SFC programs of the PLC CPU
in the SFC diagram format (MELSAP3 or MELSAP-L format).
The sequence program of PLC CPU can be edited.
The motion SFC program and devices in the motion controller
CPU (Q series) can be monitored.
Description
Compatible
Compatible
GT
GT Works3
Designer2
*1