2
Fasten the terminal block by tightening the terminal block fixing screws (2 places) with the
tightening torque of 0.20 to 0.25 N·m.
8
8.1 Communication Unit
- 14
8.1.2 Installing procedure
(Extended figure of part A)
When attaching or removing a communication cable
When attaching or removing a communication cable to/from the terminal block
socket, detach the terminal block socket from the connector.
(When extension units are installed in multiple layers, the units do not have to be
removed from the GOT main unit.)
A terminal block
fixing screw