Chapter 6: Administering Communication Manager; Accessing Communication Manager; Administering Node Names For C-Lan Circuit Packs (8400/8500/87Xx) - Avaya IG550 Installing And Configuring

Chapter 6: Administering Communication Manager

Accessing Communication Manager

1. Log in to the Communication Manager media server using SSH
2. At the Linux command line, type sat, and press Enter.
3. Log in to the sat.
Administering node names for C-LAN circuit packs (8400/8500/
87xx)
Note:
The Control-LAN (C-LAN) boards must be TN799DP running version 5 or greater
Note:
firmware. Be sure to check the firmware version for these boards on the media
server. For information on how to upgrade the firmware on the S8400, S8500 or
S8700-series Media Server, please see the "Upgrading firmware on
programmable TN circuit packs," in Upgrading, Migrating, and Converting Avaya
Media Servers and Gateways, 03-300412.
1 A third-party SSH client must already be installed on your computer. PuTTY is one such client available for
download from http://www.putty.nl/download.html. A version of PuTTY that is defaulted for SSH server access
is available for Avaya services personnel only. In this version, some values below have already been
pre-selected. While a variety of Avaya products support access using SSH, Avaya does not provide support for
third-party clients used for SSH access. Any problems with an SSH client, including PuTTY, are the
responsibility of the user or the SSH client vendor.
on the media server to support the IG550
Integrated Gateway
1
.
Issue 1.1 May 2007 119