Brackets Without Cable Guides; Brackets With Cable Guides - Avaya Aura G450 Installation, Quick Start

If you are mounting your Communication Manager Branch G450 Media Gateway is in a
●
rack with other equipment already installed, position the Communication Manager Branch
G450 Media Gateway to avoid imbalance.

Brackets without cable guides

You can attach mounting brackets without cable guides to:
Each side of the front of the Communication Manager Branch G450 Media Gateway, so
●
that the front of the Communication Manager Branch G450 Media Gateway is flush with
the rack.
The middle of each side panel of the Communication Manager Branch G450 Media
●
Gateway, so it projects forward from the rack.

Brackets with cable guides

The Communication Manager Branch G450 Media Gateway comes with a third mounting
bracket with cable guides to route and support the cables you connect.
When you front-mount the Communication Manager Branch G450 Media Gateway in a
●
rack, replace one of the standard brackets with the bracket with cable guides.
When you mid-mount the Communication Manager Branch G450 Media Gateway in a
●
rack, attach the bracket with cable guides to the front of the Communication Manager
Branch G450 Media Gateway.
You can attach the bracket to the left or right side of the Communication Manager Branch G450
Media Gateway.
Figure 1: Attaching a mounting bracket with cable guides
To rack-mount the Communication Manager Branch G450 Media Gateway at the front,
●
attach one regular bracket and the bracket with cable guides.
To rack-mount the Communication Manager Branch G450 Media Gateway at the middle:
●
1. Attach two regular mounting brackets on the sides of the chassis in the mid-mount
position.
6 Communication Manager Branch G450 Media Gateway Installation Quick Start