Interface
Interface-Mode
---------
--------------
Vl1
Enabled
show ipv6 pim bsr-router
Use the show ipv6 pim bsr-router command to display the bootstrap router
(BSR) information.
Syntax
show ipv6 pim bsr-router { candidate | elected }
•
candidate—Show the IPv6 PIM candidate bootstrap router information.
•
elected—Show the IPv6 elected PIM bootstrap router information.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
Field descriptions are shown in the following table.
Field
BSR Address
BSR Priority
BSR Hash Mask
Length
Next Bootstrap
Message
Next Candidate RP
Advertisement
1178
IPv6 Multicast Commands
Operational-Status
------------------
Operational
Description
Address of the BSR
Configured BSR priority
Configured hash mask length
Remaining time until a BSR message is sent
Time remaining until the next RP advertisement is sent.