Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
{ interface-id } { bytes | default}
ipv6 set mtu
Parameters
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
•
bytes—Specifies the MTU in bytes.
•
default—Sets the default MTU size 1500 bytes. Minimum is 1280 bytes
Default Configuration
1500 bytes
Command Mode
Privileged EXEC mode
User Guidelines
This command is intended for debugging and testing purposes and should be
used only by technical support personnel.
Example
console# ipv6 set mtu
ipv6 mld version
Use the ipv6 mld version Interface Configuration mode command to change
the version of the Multicast Listener Discovery Protocol (MLD). Use the no
form of this command to change to the default version.
Syntax
ipv6 mld version
no ipv6 mld version
Parameters
1—Specifies MLD version 1.
2—Specifies MLD version 2.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
638
IPv6 Addressing Commands
CLI\files\IPv6_Addressing.fm
gi1/0/1
default
{1 | 2}
Advertisement
Table of Contents
