Installation Safety Guidelines And Warnings; M320 Installation Safety Guidelines; M320 General Installation Safety Guidelines; M320 Chassis Lifting Guidelines - Juniper M320 Hardware Manual

CHAPTER 38
Installation Safety Guidelines and
Warnings

M320 Installation Safety Guidelines

M320 General Installation Safety Guidelines

M320 Chassis Lifting Guidelines

Copyright © 2015, Juniper Networks, Inc.
M320 Installation Safety Guidelines on page 323
Installation Safety Warnings for Juniper Networks Devices on page 324
M320 General Installation Safety Guidelines on page 323
M320 Chassis Lifting Guidelines on page 323
Before installing the router, verify that the intended site meets the specified power,
environmental, and clearance requirements.
M320 Clearance Requirements on page 91
Rack Requirements for the M320 Router on page 87
M320 Environmental Specifications on page 93
M320 DC Power Distribution on page 109
M320 Power Requirements on page 96
The weight of a fully configured M320 router is about 439 lb (199.6 kg). Observe the
following guidelines for lifting and moving the router:
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to
maneuver the router into a rack is recommended. If a lift cannot be used, a minimum
of three people are required to lift the router, and you must remove components from
the chassis before lifting.
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
323