Connecting The T640 To External Devices; Overview Of Connecting The T640 Router To External Devices - Juniper T640 Hardware Manual

CHAPTER 21

Connecting the T640 to External Devices

Overview of Connecting the T640 Router to External Devices

Copyright © 2017, Juniper Networks, Inc.
Overview of Connecting the T640 Router to External Devices on page 209
Tools and Parts Required to Connect the T640 Router to External Devices on page 210
Connecting the T640 Router to a Management Console or Auxiliary Device on page 210
Connecting the T640 Router to a Network for Out-of-Band Management on page 212
Connecting the T640 Router to an External Alarm-Reporting Device on page 214
Connecting the T640 Router to an External Clocking Device on page 215
Connecting PIC Cables to the T640 Router on page 216
After you have grounded the T640 Core Router, you can connect the following external
devices:
An external console or auxiliary device to the
Panel (CIP).
See "Connecting the T640 Router to a Management Console or Auxiliary Device" on
page 210
A laptop, modem, or other auxiliary device to the
Interface Panel (CIP).
See "Connecting the T640 Router to a Management Console or Auxiliary Device" on
page 210.
A management network to the
(CIP).
See "Connecting the T640 Router to a Network for Out-of-Band Management" on
page 212.
An external alarm-reporting device to the alarm relay contacts on the CIP.
See "Connecting the T640 Router to an External Alarm-Reporting Device" on page
An external clocking device to the
generator with RJ-48 ports.
See "Connecting the T640 Router to an External Clocking Device" on page
CONSOLE ports on the Connector Interface
AUXILIARY
ports on the Connector Interface Panel
ETHERNET
EXTERNAL CLOCK INPUTS
ports on the Connector
214.
on the SONET clock
215.
209