Connecting The T640 Router To External Devices; Overview Of Connecting The T640 Router To External Devices - Juniper T640 Hardware Manual

CHAPTER 12
Connecting the T640 Router to External
Devices

Overview of Connecting the T640 Router to External Devices

Copyright © 2013, Juniper Networks, Inc.
Overview of Connecting the T640 Router to External Devices on page 135
Tools and Parts Required to Connect the T640 Router to External Devices on page 136
Connecting the T640 Router to a Management Console or Auxiliary Device on page 136
Connecting the T640 Router to an External Alarm-Reporting Device on page 138
Connecting the T640 Router to a Network for Out-of-Band Management on page 138
Connecting the T640 Router to an External Clocking Device on page 140
Connecting PIC Cables to the T640 Router on page 141
After you have grounded the T640 Core Router, you can connect the following external
devices:
An external console or auxiliary device to the
Panel (CIP).
See "Connecting the T640 Router to a Management Console or Auxiliary Device" on
page 136
A laptop, modem, or other auxiliary device to the
Interface Panel (CIP).
See "Connecting the T640 Router to a Management Console or Auxiliary Device" on
page 136.
A management network to the
(CIP).
See "Connecting the T640 Router to a Network for Out-of-Band Management" on
page 138.
An external alarm-reporting device to the alarm relay contacts on the CIP.
See "Connecting the T640 Router to an External Alarm-Reporting Device" on page
An external clocking device to the
generator with RJ-48 ports.
CONSOLE ports on the Connector Interface
AUXILIARY
ports on the Connector Interface Panel
ETHERNET
EXTERNAL CLOCK INPUTS
ports on the Connector
138.
on the SONET clock
135