Specifying A Webaccess Agent In The Webaccess Url - Novell GROUPWISE 8 - WEBACCESS Manual

3 Make the encryption key the same as the key for any other WebAccess Agents with which the
WebAccess Application communicates.
4 Click OK to save the changes.

53.3.3 Specifying a WebAccess Agent in the WebAccess URL

To have the WebAccess Application connect to a WebAccess Agent other than the one specified in
the
commgr.cfg
that calls the WebAccess Application. For example, the default WebAccess Application URL is:
http://web_server_ip_address/gw/webacc
This URL causes the WebAccess Application to use the IP address and port number that is listed in
the
commgr.cfg
would use the following URLs:
http://web_server_ip_address/gw/webacc
For example:
http://172.16.5.18/gw/webacc
In this example, the WebAccess Application redirects its requests to the WebAccess Agent at IP
address 172.16.6.10 and port number 7204. If the WebAccess Agent is using the same port number
that is listed in the
WebAccess Agent is using the same IP address that is listed in the
to include the
If you want, you can use the WebAccess Agent's DNS hostname in the URL rather than its IP
address.
You can also specify the user interface language by adding the
to bypass the initial WebAccess language page. For example:
http://172.16.5.18/gw/webpub
For a list of language codes to use with the
Section 7.1, "Client Languages," on page
You can add the URL to any Web page. For example, if you are using the Web Services page as your
initial WebAccess page, you could add the URL to that page. You should add one URL for each
WebAccess Agent.
For example, suppose you had offices in three different locations and installed a WebAccess Agent
at each location to service the post offices at those locations. To enable the WebAccess Application
to redirect requests to the WebAccess Agent at the appropriate location, you could modify the Web
Services page to display a list of the locations. The modified page would include the following
HTML code (if WebAccess is running on NetWare or Windows):
886 GroupWise 8 Administration Guide
file, you can add the WebAccess Agent's IP address and port number to the URL
file. To redirect the WebAccess Application to another WebAccess Agent, you
?GWAP.ip=agent_ip_address&GWAP.port=port_number
?GWAP.ip=172.16.6.10&GWAP.port=7204
file, you do not need to include the
commgr.cfg
parameter.
GWAP.ip
?GWAP.ip=172.16.6.10&GWAP.port=7204&User.lang=en
commgr.cfg
&User.lang
parameter in the WebAccess URL, see
&User.lang
111.
parameter. Or, if the
GWAP.port
file, you do not need
option. This allows you