Cluster Failover Stops File Copy; Launch Server Consolidation Utility And Create A Project File - Novell SERVER CONSOLIDATION MIGRATION TOOLKIT 1.1 - ADMINISTRATION GUIDE 12-23-2005 Administration Manual

This feature is enabled on an NSS volume either by using ConsoleOne
nss /filecopyonwrite=volname
at the source server console to change the volume attributes.
For example, nss /filecopyonwrite=vol1 would enable File Copy on Write for the vol1:
volume. The effect is immediate, but it affects only files that are currently closed and then opened
later.

6.1.2 Cluster Failover Stops File Copy

If you run a server consolidation project involving a NetWare cluster and the cluster fails over
during the consolidation, the file copy will stop. The consolidation project must be run again.
6.2 Launch Server Consolidation Utility and
Create a Project File
The Server Consolidation Utility is a Windows program that is launched from the Server
Consolidation and Migration Toolkit.
1 If you have not already done so, start the Server Consolidation and Migration Toolkit.
2 Read the Welcome page, then click Create or Open Project.
3 Select NetWare or Open Enterprise Server (eDirectory), then click Next.
4 Select Consolidate and Copy Data and Printing Between Servers, then click Next.
5 Read the About screen, then click OK.
6 Do one of the following:
7 Type a project filename in the field provided.
8 (Conditional) If you want to store the project file in a location other than the default location
42 Novell Server Consolidation and Migration Toolkit Administration Guide
By default, the toolkit is installed in c:\program files\novell server
consolidation and migration toolkit. You can access it by clicking Start >
Programs > Novell Server Consolidation and Migration Toolkit > Novell Server Consolidation
and Migration Toolkit.
• To start a new consolidation project, click Create a New Project > OK. Then continue with
Step 7 on page 42.
• To open an existing project, click Open an Existing Project > OK, select the project you
want to work on, and then click Open. Then skip to
Consolidation Project," on page
• To open the last project you worked on, click Open Last Project > OK. Then skip to
Section 6.4, "Model Your Consolidation Project," on page
The Server Consolidation Utility uses a project (.mdb) file to record your intended actions.
The actions are recorded so you can execute them now or save the project file and execute the
actions later.
The filename can be up to 64 characters long and can include any character except \ * ? < > | "
/. The project name also serves as the project's folder name, so you might want to keep it short.
The project folder stores the log files and other files associated with the project.
provided, click Browse and navigate to the desired location, and then click OK.
Section 6.4, "Model Your
43.
®
or by entering
43.