Nortel Contact Center Manager User Manual page 193

August 2007
Logical instances are lines on a span or resource classes that are on a DSP.
Manufacturing information for the TMS and cards installed (revision level,
serial number, and date) is also provided. Certified Nortel support personnel can
use this data to troubleshoot or resolve compatibility issues.
The following is an example of a devlist command list.
dlt#mps.1,vos/mpsap1 {2} -> spandisable 3! disable 3rd span
!
Span disabled
dlt#mps.1,vos/mpsap1 {3} -> spanenable 3! enable 3rd span !
Span enabled
dlt#mps.1,vos/mpsap1 {5} -> spanstatus all
----------------------------------------------------------
------------
Alarm
Sp State
Conditions
----------------------------------------------------------
------------
1 GREEN
2 GREEN
3 GREEN
dlt#mps.1,vos/mpsap1 {10} -> spanlist
TMS
===
1
1
1
! SPAN 3 is in TMS slot 4 which from below indicates its
LINESIDE !
dlt#mps.1,vos/mpsap1 {8} -> devlist
Chasis Number: 15
Contact Center Manager Switch Guide for Communication Server 2x00/DMS
Time
Status Src
InService No
InService Yes
InService No
SpanId SpanDev
====== =======
1 1
2 2
3 3
Voice-processing subsystem configuration
Span Alarms
Type Received
??? (None)
T1 (None)
T1 (None)
SpanSlot
========
2
4
4
Alarms Span
Xmitted
(None) (None)
(None) (None)
(None) (None)
193