Nortel Contact Center Manager User Manual page 173

August 2007
1. Access the Embedded Web Server.
2. Perform a software upgrade using the Software Upgrade Wizard module of
the Embedded Web Server to upload the latest component (.cmp) file,
groundstart_fxs data (.dat) file, and T1 CAS file.
3. Save the changes, and restart the MG 3200.
4. Download the initialization (.ini) file and modify it for Lineside T1 CAS
protocol.
5. Use the Advanced Configuration module of the Embedded Web Server to
upload the modified .ini file to the MG 3200.
6. In the Trunk Settings module of the Embedded Web Server, apply the .dat
file and trunk parameters.
7. Apply changes to activate the trunks.
If the span is not in service, see the MG 3200 User Guide (LTRT-72704).
Accessing the Embedded Web server
To configure the MG 3200, use the Embedded Web server. To access the
Embedded Web Server, perform the following steps:
1 Open a standard Web-browsing application, such as Microsoft Internet
Explorer (Version 6.0 or later) or Netscape Navigator (Version 7.0 or later).
The browser must be JavaScript enabled. If JavaScript is disabled, a
notification message appears.
Contact Center Manager Switch Guide for Communication Server 2x00/DMS
Voice-processing subsystem configuration
173