Nortel Contact Center Manager User Manual page 176

Voice-processing subsystem configuration
Performing a software upgrade
To load the latest .cmp file, groundstart_fxs .dat file, and T1 CAS file to the
MG 3200, perform the following steps:
You can upload these files using the TFTP/BootP. For more information, see the
MG 3200 User's Manual and the MG 3200 H.248 & SIP Fast Track Installation
Guide.
1 Stop all traffic on the device.
2 From the Embedded Web Server main menu, click Software Update.
Result: The Software Upgrade window appears.
3 On the toolbar, click Software Upgrade Wizard.
Result: The Start Software Upgrade dialog box appears.
At this point you can click Cancel to stop the software upgrade process with
no consequence to the MG 3200. If you continue with the software upgrade
process by clicking Start Software Upgrade, you must complete the
process and reset the MG 3200. If you use Cancel in subsequent screen,
the software upgrade process resets the MG 3200.
176
Standard 4.06
Contact Center Manager