Voice-processing subsystem configuration
Loading the .ini file to the MG 3200
You must reset the MG 3200 after using the Advanced Configuration module.
This disrupts existing traffic on the device. To avoid disrupting traffic, disable
all traffic on the device before initiating the Advanced Configuration module.
To load the .ini file to the MG 3200, perform the following steps:
1
Stop all traffic on the device.
2
From the Embedded Web Server main menu, click Advanced
Configuration.
Result: The Advanced Configuration window appears.
3
On the toolbar, click Configuration File.
Result: The Configuration File window appears.
4
Click Browse and select the .ini file you modified in "To modify the .ini file
parameters for MPS-MG 3200 configuration" on page 183.
5
Click Send ini File.
Result: After the you load the .ini file to the MG 3200, the MG 3200 resets
with the new .ini file parameters.
6
In the End Process window, click End Process.
Result: The Quick Setup screen appears and the full Web application is
reactivated.
184
Standard 4.06
Contact Center Manager