Nortel Contact Center Manager User Manual page 188

Voice-processing subsystem configuration
Modifying trunk settings
Use the following procedure to modify trunks for the Lineside T1 CAS protocol.
1 From the Embedded Web Server main menu, click Advanced
Configuration.
Result: The Advanced Configuration window appears.
2 On the toolbar, click Trunk Settings.
Result: The Trunk Settings window appears.
3 At the bottom of the window, click Stop Trunk.
After you stop the trunk, you can modify the window settings (the
parameters no longer appear dimmed). When all trunks stop (in a
modifiable mode), two buttons appear at the bottom of the window:
Apply Trunk Settings
Apply to all Trunks
When at least one trunk is active, only the Apply Trunk Settings button
appears.
4 From the Protocol Type list, select T1 CAS.
5 From the Line Code list, select B8ZS.
188
Standard 4.06
Contact Center Manager