Nortel Contact Center Manager User Manual page 191

August 2007
For more information about configuring and troubleshooting the MG 3200, see
the MG 3200 User's Manual (LTRT-727xx).
To configure the MPS T1 protocol for the MG 3200
The following sections document how to modify the MPS lineside_T1_proto.cfg
file for groundstart signaling and either superframe format or extended
superframe format.
Superframe configuration
To configure the MPS for groundstart signaling and superframe format, modify
the lineside_T1_proto.cfg file as shown in the following example:
[SPAN_CLASS]
CLASS_NAME
CDF
STATE_TBL
PARAM TIM_standby_mode
PARAM TIM_answer
PARAM TIM_total_call
PARAM TIM_sby_on_discF
PARAM TIM_CPD_name
PARAM TIM_DTMF_name
PARAM TIM_TGEN_name
PARAM TIM_pickup_time
PARAM TIM_param_6 = 200! Auto Connect Time !
PARAM TIM_param_9 = 1
PARAM TIM_param_10 = 1 ! GroundStart = 1; Loopstart = 0;
Default 0 !
Contact Center Manager Switch Guide for Communication Server 2x00/DMS
= linesideT1
= t1_sf_cas.cdf
= linesideT1.bin
= lineNOANSWER
= 0
= TRUE
= 32
Voice-processing subsystem configuration
= 1
= "CPD"
= "DTMF"
= "TGEN"
191