Nortel Contact Center Manager User Manual page 189

August 2007
6 From the Framing Method list, depending on your system requirements,
select Super Frame or Extended Super Frame.
7 From the CAS Table list, select GroundStartTable_FXS.dat.
8 To apply the changes to the selected trunk only, click Apply Trunk
Settings.
To apply the changes to all the trunks, click Apply to all Trunks. This
option is available only if you select all trunks.
Result: The window refreshes and the parameters become read-only
(appear dimmed). The Stop Trunk button appears at the bottom of the
window.
9 From the Advanced Configuration window, select TDM Bus Settings.
Result: The TDM Bus Settings window appears.
10 From the PCM Law Select menu, select
11 Click Submit.
12 To save the changes, so they are available after a power failure, click Save
Configuration on the main menu.
Result: The Save Configuration to the Flash Memory window appears.
13 Click Save Configuration.
Result: A confirmation message appears when the save is complete.
Contact Center Manager Switch Guide for Communication Server 2x00/DMS
Voice-processing subsystem configuration
μ
-Law (MuLaw).
189