Nortel Contact Center Manager User Manual page 175

August 2007
5 Click OK.
Result: The Embedded Web Server window appears.
The Web interface is divided into the following seven modules in the main
menu:
Quick Setup—Configure the basic device settings. (For the full list of
parameters that you can configure, go directly to the Protocol Management
and Advanced Configuration menus.)
Protocol Management—Configure the control protocol parameters for the
MG 3200.
Advanced Configuration—Set the advanced configuration parameters for
the MG 3200.
Status & Diagnostics—View and monitor the device channels, syslog
messages, and hardware and software product information.
Software Update—Load new software or configuration files onto the
device.
Save Configuration—Save configuration changes to the nonvolatile
(flash) memory.
Reset—Remotely reset the device.
Contact Center Manager Switch Guide for Communication Server 2x00/DMS
Voice-processing subsystem configuration
175