2.1 Overview
The Web Configurator is an HTML-based management interface that allows easy
management via Internet browser. Use Internet Explorer 8.0 and later versions or Mozilla Firefox 3 and
later versions or Safari 2.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your
Windows 7.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
2.1.1 Accessing the Web Configurator
Make sure your FMG hardware is properly connected (refer to the Quick Start Guide).
1
Launch your web browser. If the FMG does not automatically re-direct you to the login screen, go to
2
http://192.168.1.1.
A password screen displays.
3
To access the administrative Web Configurator and manage the FMG, type the default user name
4
admin and the randomly assigned default password (see the device label) in the password screen and
click Login. If you have changed the password, enter your password and click Login.
Note: If the management session is left idle for 300 seconds, you have to log in with your
password again.
Figure 9 Password Screen
The Web Configurator
FMG3010/3015-R20A User's Guide
C
H A P T E R
. Web pop-up blocking is enabled by default in
FMG
14
2
setup and
FMG