Mitsubishi NZ2GFCF-D62PD2 User Manual page 83

1.
Display the "CC IE Field Configuration" window.
• When the master/local module is the QJ71GF11-T2
Project window
• When the master/local module is the LJ71GF11-T2
Project window
2.
Select the high-speed counter module in "List of stations" on the "CC IE Field Configuration"
window.
List of stations
3.
Open the "Parameter Processing of Slave Station" window.
[CC IE Field Configuration]
4.
Set "Parameter write" for "Method selection".
[Parameter] [Network Parameter]
button
[Parameter] [Network Parameter]
button
[Parameter Processing of Slave Station]
CHAPTER 7 VARIOUS SETTINGS
[Ethernet/CC IE/MELSECNET]
[Ethernet/CC IE Field]
7
81