Mitsubishi NZ2GFCF-D62PD2 User Manual page 208

● The error history registers 15 errors at a maximum. If 16 or more errors occur, errors are deleted from the oldest.
● If the same error occurs continuously, only the error that occurred first is stored to the error history.
● Even after the power of the module is turned off then on, the error history remains.
● To initialize the error history, set "Method selection" to "Error history clear request" on the "Command Execution of Slave
Station" window and click the
206
3.
Set "Method selection" to "Error history read" and
click the
4.
When the window shown on the left is displayed,
click the
5.
The error history of the high-speed counter module
is displayed in "Execution Result".
Item
Error and Solution
Order of generation
[Error time] First two digits
of the year/Last two digits of
the year
[Error time] Month/Day
[Error time] Hour/Minute
[Error time] Second/No Use
Error code details 1
to
Error code details 10
button.
button.
button.
Contents
The action for the error is displayed.
The order of error occurrence is displayed.
The date and time of error occurrence is
displayed.
(When the tens place of Month, Hour and
Second is "0", the date and time are displayed
without "0".)
The value in the remote register Error code
details 1 to 10 of when an error occurs is
stored.