Mitsubishi NZ2GFCF-D62PD2 User Manual page 281

(18)Station-based control data (address: 1003
Address Name
Parameter area
1003
initialization
H
completed
(19)Station-based control data (address: 1004
Address Name
Module operation
information
1004
H
initialization
command
• When initialization of the parameter information and the extended parameter
information stored in the remote buffer memory and the nonvolatile memory is
completed, Parameter area initialization completed (address: 1003
changes to Initialization is completed (1).
• When Parameter area initialization command (address: 1002
commanded (0), Parameter area initialization completed (address: 1003
changes to Initialization is not performed (0).
• The following shows the range of values which can be stored.
b15 b14 b13 b12 b11 b10 b9 b8
0 0 0 0 0 0 0 0
0 (fixed)
• The module operation information stored in the remote buffer memory and the
nonvolatile memory is initialized by this command. The module operation
information can be initialized only when Nonvolatile memory data error
(module operation information) (error code: 0110
• The following shows the setting range.
b15 b14 b13 b12 b11 b10 b9 b8
0 0 0 0 0 0 0 0
0 (fixed)
• When Module operation information initialization command (address: 1004
is set to Commanded (1), the module operation information stored in the
remote buffer memory and the nonvolatile memory is cleared and Module
operation information initialization completed (address: 1005
Initialization is completed (1).
Controlled by the high-speed counter module
Controlled by the program
Error data of
Module operation information
module operation
Module operation
information initialization
Not commanded (0)
command
(address: 1004 )
H
Module operation
information initialization
completed
(address: 1005 )
H
)
H
Description
) is set to Not
H
b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0
)
H
Description
) has occurred.
H
b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0
) changes to
H
Default value
Commanded (1) Not commanded (0)
Completed
Not performed (0)
(1)
APPENDICES
Default
)
H
)
H
0000
H
0: Initialization is
not performed
1: Initialization is
completed
Default
0: Not
commanded
1: Commanded
)
H
0000
H
Not
performed (0)
279
A