Mitsubishi NZ2GFCF-D62PD2 User Manual page 25

No. Name
P1
ON
L ER
LED
(red)
OFF
LINK
ON
LED
OFF
3) (green)
P2
L ER ON
LED
OFF
(red)
LINK ON
LED
OFF
(green)
Terminal block for
4) module power supply and
FG
5) DIN rail hook
Connectors for external
6)
devices (40 pins)
When the phase Z of the encoder is connected to the phase Z pulse input terminal (Zn), a pulse is counted per rotation of the
encoder. Therefore, lighting of the LEDs may be missed.
PORT1 connector for CC-Link IE Field Network (RJ45 connector)
Connect an Ethernet cable. (
There are no restrictions on the connection order of the cables for the "P1" connector and "P2"
connector.
• The module has received abnormal data.
• The module is performing loopback.
• The module has received normal data.
• The module is not performing loopback.
Linkup in progress
Linkdown in progress
PORT2 connector for CC-Link IE Field Network (RJ45 connector)
Connect an Ethernet cable. (
There are no restrictions on the connection order of the cables for the "P1" connector and "P2"
connector.
(Same as the P1)
(Same as the P1)
A terminal block to connect the module power supply (24VDC) and FG.
A hook to mount a module on a DIN rail
Connectors for encoders, controllers, and others
(For the terminal layouts, refer to
Description
Page 65, Section 6.5)
Page 65, Section 6.5)
Page 71, Section 6.6.3.)
CHAPTER 2 PART NAMES
23
2