8.8
Latch Counter Function (Counter Function Selection)
The latch counter function by counter function selection acquires CH Present value (RWr10 to RWr11, RWr28 to
RWr29) of the counter and stores it in the remote register when CH Function input terminal (FUNC1, FUNC2) or
CH Selected counter function start command (RY25, RY3D) is input.
(1) Setting method of the latch counter function (counter function selection)
1.
Set "Parameter write" for "Method selection".
"CC IE Field Configuration" window
2.
Select "1: Latch Counter Function" in "CH Counter function selection".
[CC IE Field Configuration]
Select a high-speed counter module in "List of stations"
[Parameter Processing of Slave Station]
CHAPTER 8 FUNCTIONS
133
8