Connectors For External Devices - Mitsubishi NZ2GFCF-D62PD2 User Manual

6.6.2

Connectors for external devices

The connectors and crimp tools for use with the high-speed counter module must be purchased separately by the
user.
The following tables list the connector types and the crimp tool.
(1) Precautions
• Tighten the connector screws within the following specified torque range.
Connector screw (M2.6 screw)
• Use copper wires having temperature rating of 75°C or more for the connectors.
• When required, use UL-approved connectors.
(2) Connector types
Soldering type
(straight out)
Crimp type
(straight out)
Soldering type
(straight out/diagonal out)
*1 The A6CON3 (pressure-displacement type, straight out) connector cannot be used for the high-speed counter module.
(3) Connector crimp tool
Type
Crimp tool
70
Screw type
*1
Type
Model
FCN-363T-T005/H
Tightening torque range
0.20 to 0.29N•m
Model
A6CON1
0.3mm
0.088 to 0.24mm
A6CON2
(28 to 24 AWG) (stranded)
A6CON4
0.3mm
Applicable wire size
2
FUJITSU COMPONENT LIMITED
0.088 to 0.24mm
http://www.fcl.fujitsu.com/en/
(28 to 24 AWG)
Applicable wire size
2
(22 AWG) (stranded)
2
2
(22 AWG) (stranded)
Contact