Mitsubishi NZ2GFCF-D62PD2 User Manual page 178

Item to be diagnosed
Display of network
configuration diagram and
1
error status
Display of selected-station
2
status and error details
Communication Test
IP Communication Test
3
Cable Test
Link Start/Stop
Network Event History
Reserved Station Function
Enable
4
Enable/Disable Ignore
Station Errors
System Monitor
5
Remote Operation
*1 "Selected Station Communication Status Monitor", which appears at the bottom right in the window, indicates the
communication status of the high-speed counter module. For the error and warning for the high-speed counter module,
refer to the following.
• Checking for The Error Codes and the Warning Codes (
176
The status of the CC-Link IE Field Network can be checked.
When an error or warning for the high-speed counter module occurs, an icon
appears.
The communication status of the station selected in "Networks Status" can be
*1
checked.
The transient communication route and whether the communication is
established from the connected station to the destination station can be
checked.
The reaching time and the route of the IP communication from the connected
station to the target station can be checked.
This function is unavailable for the high-speed counter module.
The cable status between the connected station and the destination station
can be checked.
The network data link can be started and stopped.
The history of various events that occurred in the network can be checked.
A reservation for a station can be temporarily cancelled, and the cancellation
can be disabled. Also, the station numbers for the modules set as reserved
stations can be checked on a list.
A station not set as an error invalid station can be temporarily set as an error
invalid station, and the error invalid station setting can be disabled. Also, the
station numbers for the modules set as (temporarily) error ignore stations can
be checked on a list.
The system monitor on the selected station is activated and the status of the
module can be checked.
This function is unavailable for the high-speed counter module.
The selected station can be reset through the remote operation.
Description
Page 205, Section 11.1)
Reference
User's manual for the
master/local module
used
Page 177, Section
8.21 (1) (a)