(d) Program for the cam switch function
(e) Program for overflow/underflow detection processing
The program is the same as the program example of the normal mode. (
(f) Program for an error/warning reset
The program is the same as the program example of the normal mode. (
(g) Program for reading the error history
The program is the same as the program example of the normal mode. (
198
Turn on CH1 Cam switch execute
command.
Turn off CH1 Cam switch execute
command.
Page 196, Section 9.3 (8) (e))
Page 196, Section 9.3 (8) (f))
Page 196, Section 9.3 (8) (g))