Table of Contents
Advertisement
(c) Remote register setting
Point setting (Coincidence output 1) (RWw0 to RWw1)
Lower limit value setting (Coincidence output 2) (RWw4 to RWw5)
Upper limit value setting (Coincidence output 2) (RWw6 to RWw7)
CH1 Ring counter lower limit value (RWw10 to RWw11)
CH1 Ring counter upper limit value (RWw12 to RWw13)
CH1 Preset value setting (RWw14 to RWw15)
CH1 Time unit setting (Sampling counter/Periodic pulse counter) (RWw16)
CH1 Cycle setting (Sampling counter/Periodic pulse counter) (RWw17)
CH1 Frequency measurement
CH1 Time unit setting (Frequency measurement) (RWw18)
CH1 Moving average count (Frequency measurement) (RWw19)
CH1 Rotation speed measurement
CH1 Time unit setting (Rotation speed measurement) (RWw18)
CH1 Moving average count (Rotation speed measurement) (RWw19)
CH1 Number of pulses per rotation (RWw1A to RWw1B)
*6
CH1 PWM output
CH1 PWM output assignment setting (RWw1D)
CH1 ON width setting (PWM output) (RWw1E to RWw1F)
CH1 Cycle setting (PWM output) (RWw20 to RWw21)
*1
Set only when using the coincidence output function.
*2
Set only when using the ring counter function.
*3
Set only when using the sampling counter function or the periodic pulse counter function.
*4
Set only under the frequency measurement mode.
*5
Set only under the rotation speed measurement mode.
*6
Set only under the PWM output mode.
If Initial data processing request flag (RX8) turns on when the module is powered on, always set the remote register.
184
Setting item
*1
*2
*2
*4
*5
Setting details (setting value)
1000
*1
1000
*1
2000
-5000
5000
100
*3
1ms(0)
*3
2000ms(2000)
0.01s(0)
3
0.01s(0)
3
1000
Output to Coincidence output 1 (0001
100.0us(1000)
200.0us(2000)
⎯
⎯
⎯
)
H
Advertisement
Table of Contents
Troubleshooting
