Mitsubishi NZ2GFCF-D62PD2 User Manual page 279

(15)Station-based control data (address: 1000
Address Name
Error history clear
1000
H
command
(16)Station-based control data (address: 1001
Address Name
Error history clear
1001
H
completed
• The error history stored in the remote buffer memory and the nonvolatile
memory is cleared by this command.
• The following shows the setting range.
b15 b14 b13 b12 b11 b10 b9 b8
0 0 0 0 0 0 0 0
0 (fixed)
• When Error history clear command (address: 1000
(1), the error history stored in the remote buffer memory and the nonvolatile
memory is cleared and Error history clear completed (address: 1001
changes to Clear is completed (1).
Controlled by the high-speed counter module
Controlled by the program
Stored condition of
An error history is stored.
an error history
Error history
clear command
Not commanded (0)
(address: 1000 )
H
Error history
clear completed
(address: 1001 )
H
• Errors or warnings which have occurred are not reset even when Error history
clear command (address: 1000
reset command (RY36, RY4E) to reset them.
• When clearing the error history stored in the remote buffer memory and the
nonvolatile memory is completed, Error history clear completed (address:
1001 ) changes to Clear is completed (1).
H
• When Error history clear command (address: 1000
commanded (0), Error history clear completed (address: 1001
Clear is not performed (0).
• The following shows the range of values which can be stored.
b15 b14 b13 b12 b11 b10 b9 b8
0 0 0 0 0 0 0 0
0 (fixed)
)
H
Description
b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0
) is set to Commanded
H
An error history is not stored.
Commanded (1) Not commanded (0)
Completed
Not performed (0)
(1)
) is set to Commanded (1). Use CH Error
H
)
H
Description
) is set to Not
H
H
b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0 0: Clear is not
1: Clear is
APPENDICES
Default
0: Not
commanded
1: Commanded
)
H
0000
H
Not performed
(0)
Default
) changes to
0000
H
performed
completed
277
A