Mitsubishi NZ2GFCF-D62PD2 User Manual page 15

Term
Link special relay (SB)
Link special register (SW)
Routing
Local station
Disconnection
Main module
High-speed counter module
Dedicated instruction
Extension module
Extension I/O module
Relay station
Return
Reserved station
Bit data that indicates the operating status and data link status of a module on CC-Link IE Field
Network
Bit data that indicates the operating status and data link status of a module on CC-Link IE Field
Network
A process of selecting paths for communication with other networks.
On CC-Link IE Field Network, set a network route with the routing parameter in advance to
communicate with a station that is set a different network number.
A high-speed counter module does not need to set the routing parameter. Communications with
other networks are performed according to the routing parameters set to the master station.
A station that includes a CPU module and can communicate with the master station and other local
stations.
This station can create simplified CC-Link IE Controller Network by combining the master station
and other local stations.
The station can perform the cyclic transmission and transient transmission.
A process of stopping data link if a data link error occurs
A module with the CC-Link IE Field Network communication function, which can be used as a single
remote module. Extension modules can be connected to this module.
The abbreviation for the CC-Link IE Field Network high-speed counter module
An instruction that simplifies programming for using functions of intelligent function modules
A remote module that does not support the CC-Link IE Field Network communication function. This
module cannot be used as a single module. However, connecting the module to the main module will
increase the number of I/O points per station.
A generic term for extension modules where a digital signal can be input or output
A station that includes two or more network modules. Data are passed through this station to
stations on other networks.
A process of restarting data link when a station recovers from an error
A station reserved for future use. This station is not actually connected, but counted as a connected
station.
Description
13