(4) Output destination of comparison result for the coincidence output function
The following table lists the output destination of the comparison result for each comparison condition.
Setting item
Coincidence output 1 to 4 (RX10 to
RX13)
Coincidence output 1 to 4 terminals
(EQU1 to EQU4)
Counter value greater/smaller signal
(RWr0)
The following table lists the details on Counter value greater/smaller signal (RWr0).
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
0
0
0
0
0
0
0
106
Comparison condition
Coincidence
output
Details
Coincidence
Coincidence
Coincidence
Coincidence
output 4
output 3
output 2
0
Within-range
Out-of-range
output
output
⎯
⎯
Bit name
Counter value
smaller
(Coincidence
output 1 to 4)
output 1
Counter value
greater
(Coincidence
output 1 to 4)
Output overview
Outputs the result whether the specified
comparison condition was satisfied or not.
Outputs a relationship (greater or smaller)
between the present value and the point
setting (coincidence output 1 to 4).
Point setting (Coincidence output 1 to 4)
(Present
(Present
value) >
value) =
0
0
1
0
: Enable ⎯: Disable
>
(Present
value) <
1
0