Mitsubishi NZ2GFCF-D62PD2 User Manual page 224

● When multiple errors occur, only the latest error code is stored in CH Latest error code (RWr22, RWr3A) or CH Latest
warning code (RWr23, RWr3B). (Error codes which do not have  on their names are stored in CH1.)
Old errors can be checked with the error history of GX Works2.
For the error history, refer to the following.
• Checking by executing a command of the slave station (
• Error history 1 to 15 (address: 0A00
● Turning on CH Error reset command (RY36, RY4E) resets errors. However, the error causes are detected again and
thus the error codes are stored again unless the error causes are removed.
(a) Detailed error information list
Detailed information about errors is stored in Error code details 1 in Error history 1 to 15 (address: 0A00
0AEF ). The following table lists the error codes with the detailed information.
H
Error code
(hexadecimal)
050
H
200
H
Error codes other than
 050 and  200
H
222
Classification
CH Overflow/underflow error (Sampling
Minor error count value/Periodic pulse count, difference
value)
Moderate error CH Overflow/underflow error
⎯ ⎯
H
Page 205, Section 11.1 (1))
to 0AEF ) ( Page 276, Appendix 3 (14))
H H
Error name
Error code Error code
details 1 details 2 to 10
0: Underflow
0 (fixed)
1: Overflow
0: Underflow
0 (fixed)
1: Overflow
0 (fixed) 0 (fixed)
to
H