Table of Contents
Advertisement
6.3
Installation
6.3.1
Connecting extension modules
(1) Connecting procedure
Release
58
Lock
Lock
1.
Remove the cover on the side of the module.
Do not dispose the removed cover, but store it.
2.
Release the module joint levers (two points) on the
side of the extension module. Slide the levers
vertically.
3.
Insert the connector of the extension module into
that of the high-speed counter module so that they
are securely engaged.
4.
Lock the module joint levers (two points) on the
side of the extension module. Slide the levers
toward the module.
Check that the modules are securely connected.
Advertisement
Table of Contents
Troubleshooting
