Figure 3: Locating the server cover's captive screws
Figure notes:
1.
Server cover's captive screws
Removing the fan unit
To remove the fan unit from the media server:
1. Locate the slot labeled PCI-2 on the left hand side of the back of the server under the fan
unit.
2. Remove the two screws holding the fan unit. You do not need to unplug the fan unit.
3. Set the adapter-support bracket to the right of the fan.
d i
s c
1
h3mscaps LAO 070103
555-245-760 Issue 3 January 2005
5