Sp Led Is Lit; Fan Led Is Lit; Temp Led Is Lit - Avaya Aura S8800 Maintaining

Troubleshooting

SP LED is lit

The SP LED on the light path diagnostics panel is lit when an error occurs on the service
processor.
Troubleshooting steps
Procedure
1. Remove power from the server; then, reconnect the server to power and restart the
2. Report this error to your service provider for possible server replacement.

FAN LED is lit

The FAN LED on the light path diagnostics panel is lit when a fan fails, is operating too slowly,
or has been removed. The TEMP LED might also be lit.
Troubleshooting steps
Procedure
1. Reseat the failing fan, which is indicated by a lit LED near the fan connector on the
2. Replace the server.

TEMP LED is lit

The TEMP LED on the light path diagnostics panel is lit when the system temperature exceeds
a threshold level. A failing fan can cause the TEMP LED to be lit.
64 Maintaining the Avaya S8800 Server for Avaya Aura
server.
system board.
Comments? infodev@avaya.com
®
SIP Enablement Services November 2009