The Ping Command; Ping Command Syntax - Avaya CallPilot 201i Maintenance And Diagnostics

The following flags are available for the ipconfig command:
Flag
/?
/all
/release
/renew
To run the ipconfig command from the operating system
1. Click Start → Programs → Accessories → Command Prompt to display the
2. At the prompt, type ipconfig <with appropriate parameters>.
3. Press Enter.
4. Type Exit to exit the Command Prompt window.

The ping command

The ping command sends an echo request to a specified host. Use this command to verify
network connectivity to the remote device.

Ping command syntax

The ping command uses the following syntax:
ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS] [-r count]
[-s count] [[-j host-list] | [-k host-list]] [-w timeout]
destination-list
Parameter
-t
-a
-n count
Avaya CallPilot® 201i Server Maintenance and Diagnostics
Displays Help information.
Displays full configuration information.
Releases the IP address for the specified adapter.
Renews the IP address for the specified adapter.
command prompt window.
Result: The Command Prompt window appears.
Example: ipconfig /all
Result: The system runs the ipconfig utility.
Pings the specified host until interrupted.
Resolves addresses to host names.
Specifies the number of echo requests to send.
Description
Description
The ping command
December 2010 41