Suzuki Baleno Manual page 1012

9-12 BODY SERVICE
BACK DOOR (For Hatch-back and Wagon Models)
[A]
[A]
[B]
[A]: Hatch-back model
[B]: Wagon model
[B]
REMOVAL
1) Remove back door trim.
2) Disconnect wire harness connector inside back door to take it
out from door.
1. Clamp
2. Coupler
3. Quarter inner trim
4. Rear speaker
3) As to vehicle provided with back window washer, disconnect
washer hose.
Remove back door balancer lower (door side) fitting screws.
4) Remove door hinge bolts, and then remove door.
1. Washer hose
2. Wire harness
[A]: Hatch-back model
[B]: Wagon model
1. Back door panel
2. Back door window glass
3. Molding
4. Back door window trim
5. Back door trim
6. Back door licence garnish
7. Stopper
8. Back door balancer