Configuring Rtls - ZyXEL Communications ZyWall ATP series User Manual

The following table lists default port numbers and types of packets RTLS uses.
Table 85 RTLS Traffic Port Numbers
PORT NUMBER
8548
8549
8550
8552
8553
8554
8560
8562
8569

8.6.3 Configuring RTLS

Click Configuration > Wireless > RTLS to open this screen. Use this screen to turn RTLS (Real Time Location
System) on or off and specify the IP address and server port of the Ekahau RTLS Controller.
Figure 161 Configuration > Wireless > RTLS
The following table describes the labels in this screen.
Table 86 Configuration > Wireless > RTLS
LABEL
Enable
IP Address
Server Port
Apply
Reset
Chapter 8 Wireless
TYPE DESCRIPTION
TCP Ekahau T201 location update.
UDP Ekahau T201 location update.
TCP Ekahau T201 tag maintenance protocol and Ekahau RTLS Controller user interface.
UDP Ekahau Location Protocol
UDP Ekahau Maintenance Protocol
UDP Ekahau T301 firmware update.
TCP Ekahau Vision web interface
UDP Ekahau T301W firmware update.
UDP Ekahau TZSP Listener Port
DESCRIPTION
Select this to use Wi-Fi to track the location of Ekahau Wi-Fi tags.
Specify the IP address of the Ekahau RTLS Controller.
Specify the server port number of the Ekahau RTLS Controller.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL ATP Series User's Guide
202