ZyXEL Communications ZyWall ATP series User Manual page 175

Figure 144 Monitor > Log > View Log
The following table describes the labels in this screen.
Table 69 Monitor > Log > View Log
LABEL
Show (Hide) Filter
Category
Priority
Source Address
Destination Address
Source Interface
Destination Interface
Service
Chapter 6 Monitor
DESCRIPTION
Click this button to show or hide criteria that allow you to filter logs that will be
displayed.
If the filter settings are hidden, the Category, Email Log Now, Refresh, and Clear fields
are available.
If the filter settings are shown, the Category, Priority, Source Address, Destination
Address, Source Interface, Destination Interface, Service, Keyword, Protocol and Search
fields are available.
Select the type of log message(s) you want to view. You can also view All Logs at one
time, or you can view the Debug Log.
This displays when you show the filter. Select the priority of log messages to display. The
log displays the log messages with this priority or higher. Choices are: any, emerg, alert,
crit, error, warn, notice, and info, from highest priority to lowest priority. This field is
grayed out if the Category is Debug Log.
This displays when you show the filter. Type the source IP address of the incoming
packet that generated the log message. Do not include the port in this filter.
This displays when you show the filter. Type the IP address of the destination of the
incoming packet when the log message was generated. Do not include the port in this
filter.
This displays when you show the filter. Type the source interface of the incoming packet
that generated the log message.
This displays when you show the filter. Type the interface of the destination of the
incoming packet when the log message was generated.
This displays when you show the filter. Select the service whose log messages you would
like to see. The Web Configurator uses the protocol and destination port number(s) of
the service to select which log messages you see.
ZyWALL ATP Series User's Guide
175