Web Configurator - ZyXEL Communications ZyWall ATP series User Manual

Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the Zyxel Device. Access it using remote
management (for example, SSH or Telnet) or via the physical or Web Configurator console port. See the
Command Reference Guide for CLI details. The default settings for the console port are:
Table 2 Console Port Default Settings
SETTING
Speed
Data Bits
Parity
Stop Bit
Flow Control
FTP
Use File Transfer Protocol for firmware upgrades and configuration backup/restore.
SNMP
The device can be monitored and/or managed by an SNMP manager. See
CloudCNM
Use the CloudCNM screen (see
the Zyxel Device by a Central Network Management system.
Management Authentication
Managers must be authenticated with a username and password, using one of:
Zyxel Device
• Local
• An external RADIUS server
• An external LDAP server
• Certificates

1.4 Web Configurator

In order to use the Web Configurator, you must:
• Use one of the following web browser versions or later:
• Internet Explorer 10.x, 11.x
• Chrome latest version (45 or above)
• Firefox latest version (45 or above)
• Safari latest version (9.0 or above)
• Allow pop-up windows (blocked by default in some browsers)
Chapter 1 Introduction
VALUE
115200 bps
8
None
1
Off
Section 37.15 on page
authentication
ZyWALL ATP Series User's Guide
29
Section 37.11 on page
743) to enable and configure management of
732.