Stopping The Zyxel Device - ZyXEL Communications ZyWall ATP series User Manual

The following table shows the default physical port and interface mapping for each model at the time
of writing.
Table 13 Default Physical Port - Interface Mapping
PORT / INTERFACE
• ATP500
• ATP200
Table 14 Default Physical Port - Interface Mapping - ATP800
PORT /
INTERFACE
ATP800
The following table shows the default interface and zone mapping for each model at the time of
writing.
Table 15 Default Zone - Interface Mapping
ZONE / INTERFACE
• ATP200
Table 16 Default Zone - Interface Mapping
ZONE / INTERFACE
• ATP500
• ATP800

3.4 Stopping the Zyxel Device

Always use Maintenance > Shutdown > Shutdown or the shutdown command before you turn off the
Zyxel Device or remove the power. Not doing so can cause the firmware to become corrupt.
Chapter 3 Hardware, Interfaces and Zones
P1 P2
ge1 ge2
sfp wan
P1 P2 P3 P4 P5
ge1 ge2 ge3 ge4 ge5
WAN
WAN1 LAN1
WAN1_PPP
WAN2
WAN2_PPP
WAN
GE2 GE4
GE2_PPP GE5
GE3
GE3_PPP
GE1 GE3
GE1_PPP GE4
GE2
GE2_PPP
ZyWALL ATP Series User's Guide
P3 P4
ge3 ge4 ge5
wan lan1 lan1
P6 P7 P8 P9
ge6 ge7 ge8 ge9
LAN1 LAN2
LAN2 DMZ
LAN DMZ
GE6
GE5
69
P5 P6 P7
ge6 ge7
lan1 lan1
P10 P11 P12 P13
ge10 ge11 ge12 ge13
DMZ OPT
SFP
SFP_PPP
OPT NO DEFAULT ZONE
GE1 GE7
GE1_PPP GE7_PPP
GE8
GE8_PPP
GE13 GE6~GE12
GE13_PPP GE6_PPP~GE12_PPP
GE14
GE14_PPP
P8
ge8
P14
ge14
NO
DEFAULT
ZONE
GE7
GE7_PPP
GE8
GE8_PPP